300x300 400x400 600x600 Full body tiles

Glazed porcelain tiles,full body tiles 1.Size wide range:800x800,600x600,300x300,400x400... as per required 2. W.A<0.5%

Full body tiles

Glazed porcelain tiles, Wall tiles, floor tiles.

1. This is the best tile for hotel, airport, Department stores, Residential buildings, big project etc.

2. Packing details:

    a) 400*400MM 10pcs/ctn, 30kg/ctn, 1.60Sqm/ctn;

    b) 300*600MM  8pcs/ctn, 30kg/ctn, 1.44Sqm/ctn;

    c) 600*600MM  4pcs/ctn, 30kg/ctn, 1.44Sqm/ctn;

    d) 800*800MM  3pcs/ctn, 50kg/ctn; 1.92Sqm/ctn;

    e)1000*1000MM 2pcs/ctn, 60kg/ctn; 2.00Sqm/ctn

3. Delivery Time: 15days

4. We have many different color and different design in this series. Please kindly check our website.

5. Our price is very competitive with very good quality;

6. We have CE, ISO9001, Soncap, SASO for most of our tiles.

7. It's available in polished, super glossy, matt finish, etc.

8. Below are the inspection report: 

Inspection Report
Test Basis on ISO13006
Item No.: FULL BODY
Test Description		Test Method	ISO13006 BIa				Test Result
			Limit
			Surface (CM2) s
			s>410
Length and WidthThe  manufacturer shall choose the work size as follows:a) for modular tiles in order to allow a nominal joint width of between 2mm and 5mm1);b) for non-modular tiles so that the difference between the work size and the nominal size is not more than ±2%(max. ±5mm).The deviation, in percent, of the average size for each tile (2 or 4 sides) from the work size (W).		ISO10545-2	600±1.0				600.1 ~ 600.4
The deviation, in percent, of the average size for each tile (2 or 4 sides) from the average size of the 10 test specimens (20 to 40 sides).		ISO10545-2	±0.5%				/
Thickness	a) The thickness shall be specified by the manufacturer.	ISO10545-2	-				/
	b) The deviation, in percent, of the average thickness of each tile from the work size thickness.		±5%				/
Straightness of sides(facial sides)The maximum deviation from straightness, in percent, related to the corresponding work sizes.		ISO10545-2	±0.2%				-0.03 ~ +0.04%
RectangularityThe maximum deviation from rectangularity, in percent, related to the corresponding work sizes.		ISO10545-2	±0.2%				-0.02 ~ +0.03%
Surface flatness                        The maximum deviation from flatness, in percent:	a) central curvature, related to diagonal calculated from the work sizes;	ISO10545-2	±0.2%				-0.04~ +0.04%
	b) edge curvature, related to the corresponding work sizes;		±0.2%				-0.04 ~ +0.06%
	c) warpage, related to diagonal calculated from the work sizes.		±0.2%				-0.05~ +0.04%
Surface Quality		ISO10545-2	A minimum of 95% of the tiles shall be free from visible defect that would impair the appearance of a major area of tiles				Conformed
Water absorption       Percent by mass		ISO10545-3	≤0.5%individual maximum 0.6%				0.23%                   0.16~0.30%
Breaking strength, in N	a) thickness   ≥ 7.5mm	ISO10545-4	Not less   than 1300				1607.4N
	b) thickness  < 7.5mm		Not less than 700				/
Modulus of rupture, in N/mm2Not applicable to tiles with breaking strength ≥ 3000 N		ISO10545-4	Minimum 35Individual minimum 32				39.6MPa           38.0~43.6MPa

300x300 400x400 600x600 Full body tiles